Diamond Dotted Film

Diamond Dotted Film

Diamond dotted polyester film is the insulation material made by coating special modified epoxy resin on the electrical polyester film,and baked it to.

ISO 9001:2015 ISO 14001:2015 ISO 45001:2018 UL E310670 RoHS REACH

Description

Diamond dotted polyester film is the insulation material made by coating special modified epoxy resin on the electrical polyester film,and baked it to semi-cured state. For the resin coating layer on the film is points but not a whole,the air and liquid can easy circulate in the passages between the resin coating,and this will minimize the damage of corona and partial discharge. Diamond dotted polyester film can be used as layer insulation material in the insulation system of air or oil,and it mainly used as layer insulation or turn-to-turn insulation of six sulfur hexafluoride mutual inductor and transformer. Main features of the Diamond Dotted Film —Insulation class:E Class (120℃) —Width: 1010mm —Thickness:0.025mm-0.35mm —Can be customized —The diamond dotted paper has been approved by UL (NO.: E310670) ,ROHS and REACH test.

Technical Specifications

Item

 

Unit

 

Value

Base material thickness

mm

0.05

0.075

0.10

Thickness tolerance

mm

±0.0 05

Tensile strength

Mpa

≥150

Single resin thickness

um

10~20

Shrinkage

%

≤1.5

Power frequency breakdown voltage

V

≥ 6000

≥ 7000

≥ 8000

Bonding strength
(bonding shear strength with copper plate)

Mpa

≥0.6

Long-term heat resistance

℃

≥130

 

Storage

Store in a dry, clean and ventilated environment below 40 ℃. It is not allowed to be close to fire sources or heating, and protected from direct sunlight. The storage period is 10 months. The over storage period can be used after passing the inspection.

Specifications

Item

 

Unit

 

Value

Base material thickness

mm

0.05

0.075

0.10

Thickness tolerance

mm

±0.0 05

Tensile strength

Mpa

≥150

Single resin thickness

um

10~20

Shrinkage

%

≤1.5

Power frequency breakdown voltage

V

≥ 6000

≥ 7000

≥ 8000

Bonding strength
(bonding shear strength with copper plate)

Mpa

≥0.6

Long-term heat resistance

℃

≥130

 

Storage

Store in a dry, clean and ventilated environment below 40 ℃. It is not allowed to be close to fire sources or heating, and protected from direct sunlight. The storage period is 10 months. The over storage period can be used after passing the inspection.

INQUIRY CHANNEL

Have an upcoming project? Let's talk.

Send us your required specifications (thickness, width, quantity) and we will send a customized quotation within 12 hours.

✉
☏

WhatsApp / Phone

+86 19937408623