



Insulation Transparent Polyester Film
Transparent polyester film is made of polyethylene terephthalate (PET) by casting and equalizing biaxial orientation.
- Type
- 6020 Polyester Film (Tape)
- Insulation class
- E
- Color
- Transparent
- Width
- conventional width 1010mm
- Thickness
- 0.025 mm - 0.35 mm
Description
Transparent polyester film is made of polyethylene terephthalate (PET) by casting and equalizing biaxial orientation.
Technical Specifications
| Item | Unit | Index value | ||||||||||||||
| Nominal thickness | um | 25 | 36 | 50 | 75 | 100 | 125 | 150 | 190 | 250 | 300 | 350 | ||||
| Thickness deviation | um | ±10% | ||||||||||||||
| Wide format | m | 1m, Special width can cut | ||||||||||||||
| Density | Kg/m3 | 1390±10 | ||||||||||||||
| Melting point | ℃ | ≥256 | ||||||||||||||
| Relative permittivity | 48Hz~62Hz | / | 2.9~3.4 | |||||||||||||
| 1KHz | 3.2±0.3 | |||||||||||||||
| Dielectric loss | 48Hz~62Hz | ≤3.0×10-3 | ||||||||||||||
| factor | 1KHz | / | ≤6.0×10-3 | |||||||||||||
| Volume resistivity | Ω·m | ≥1.0×1014 | ||||||||||||||
| Surface resistivity | Ω | ≥1.0×1013 | ||||||||||||||
| Electrolytic corrosion | Visual | / | A1 | |||||||||||||
| Stretched wire | % | ≤2 | ||||||||||||||
| Dimensional stability at high | Under tension | ≥200 | ||||||||||||||
| temperature | Under pressure | ℃ | ≥200 | |||||||||||||
| Thickness | um | 25~100 | 100~250 | >250 | ||||||||||||
| Tensile strength (MD or TD) | MPa | ≥150 | ≥140 | ≥110 | ||||||||||||
| minimum | ||||||||||||||||
| Elongation at break (MD or TD) | % | ≥80 | ≥80 | ≥80 | ||||||||||||
| minimum | ||||||||||||||||
| Shrinkage(lengthways or crosswise | % | ≤3.0 | ≤3.0 | ≤2.0 | ||||||||||||
| maximum | ||||||||||||||||
| Nominal thickness | um | 25 | 36 | 50 | 75 | 100 | 125 | 150 | 190 | 250 | 300 | 350 | ||||
| Power frequency electrical strength | V/um | 170 | 150 | 130 | 105 | 90 | 80 | 75 | 65 | 60 | 55 | 50 | ||||
| Long-term heat resistance | ℃ | T1≥130;End point standard: tensile strength maintains the | ||||||||||||||
| starting value10% | ||||||||||||||||
Advantages
Transparent polyester film has a heat resistance grade of E (120 ° C). It is an clear film with good flexibility, high mechanical strength and dielectric properties, uniform thickness and shiny surface.
Applications
Transparent polyester film used for low-voltage motors, electrical coil turns, end-wrap insulation, gasket insulation, electromagnetic wire wrapped insulation, E, B-class motor slot insulation and capacitor media, cable wrap, transformer and composite materials, can also be used for packaging, FRP, clothing collars and other occasions
Storage & Notice
1. During slitting and use, edge gaps and cracks should be prevented to avoid tearing during operation and to avoid surface scratches, oil and dust pollution.
2. Store in an environment below 40℃, keep clean and dry, away from heat sources, and avoid direct sunlight.
3. The storage period is one year. If it exceeds the storage period, it can still be used if it passes the test according to the technical requirements.
Specifications
| Item | Unit | Index value | ||||||||||||||
| Nominal thickness | um | 25 | 36 | 50 | 75 | 100 | 125 | 150 | 190 | 250 | 300 | 350 | ||||
| Thickness deviation | um | ±10% | ||||||||||||||
| Wide format | m | 1m, Special width can cut | ||||||||||||||
| Density | Kg/m3 | 1390±10 | ||||||||||||||
| Melting point | ℃ | ≥256 | ||||||||||||||
| Relative permittivity | 48Hz~62Hz | / | 2.9~3.4 | |||||||||||||
| 1KHz | 3.2±0.3 | |||||||||||||||
| Dielectric loss | 48Hz~62Hz | ≤3.0×10-3 | ||||||||||||||
| factor | 1KHz | / | ≤6.0×10-3 | |||||||||||||
| Volume resistivity | Ω·m | ≥1.0×1014 | ||||||||||||||
| Surface resistivity | Ω | ≥1.0×1013 | ||||||||||||||
| Electrolytic corrosion | Visual | / | A1 | |||||||||||||
| Stretched wire | % | ≤2 | ||||||||||||||
| Dimensional stability at high | Under tension | ≥200 | ||||||||||||||
| temperature | Under pressure | ℃ | ≥200 | |||||||||||||
| Thickness | um | 25~100 | 100~250 | >250 | ||||||||||||
| Tensile strength (MD or TD) | MPa | ≥150 | ≥140 | ≥110 | ||||||||||||
| minimum | ||||||||||||||||
| Elongation at break (MD or TD) | % | ≥80 | ≥80 | ≥80 | ||||||||||||
| minimum | ||||||||||||||||
| Shrinkage(lengthways or crosswise | % | ≤3.0 | ≤3.0 | ≤2.0 | ||||||||||||
| maximum | ||||||||||||||||
| Nominal thickness | um | 25 | 36 | 50 | 75 | 100 | 125 | 150 | 190 | 250 | 300 | 350 | ||||
| Power frequency electrical strength | V/um | 170 | 150 | 130 | 105 | 90 | 80 | 75 | 65 | 60 | 55 | 50 | ||||
| Long-term heat resistance | ℃ | T1≥130;End point standard: tensile strength maintains the | ||||||||||||||
| starting value10% | ||||||||||||||||


