



Composite Flexible Electrical Aramid Ama Insulation Paper Materials
AMA Aramid paper composite insulating materials is a three-layer flexible composite material, produced by using F Class adhesive to adhere the polyester film.
- Type
- AMA Aramid Paper Composite Insulating Materials
- Insulation Grade
- F
- Composition
- Domestic Aramid Paper + polyester film + domestic Aramid Paper
- Width
- normal width 914mm
- Thickness
- 0.15 mm-0.35mm
Description
AMA Aramid paper composite insulating materials is a three-layer flexible composite material, produced by using F Class adhesive to adhere the polyester film with Aramid paper on both sides.
Technical Specifications
| Item | Unit | Requirement | |||||||||
| Nominal thickness | mm | 0.15 | 0.17 | 0.19 | 0.22 | 0.24 | 0.26 | 0.31 | 0.37 | 0.41 | |
| Thickness tolerance | mm | ±0.022 | ±0.024 | ±0.026 | ±0.031 | ±0.037 | ±0.041 | ||||
| Grammage | g/m2 | 150±18 | 170±20 | 200±24 | 230±27 | 270±32 | 305±36 | 360±43 | 450±54 | 515±61 | |
| Film nominal thickness | um | 36 | 50 | 75 | 100 | 125 | 150 | 188 | 250 | 300 | |
| Tensile strength | MD no bending | N/10mm | ≥150 | ≥150 | ≥170 | ≥190 | ≥220 | ≥240 | ≥270 | ≥330 | ≥370 |
| MD after bending | ≥90 | ≥90 | ≥105 | ≥120 | ≥150 | ≥180 | ≥200 | ≥300 | ≥330 | ||
| TD no bending | ≥80 | ≥90 | ≥100 | ≥110 | ≥130 | ≥170 | ≥200 | ≥250 | ≥300 | ||
| TD after bending | ≥70 | ≥70 | ≥90 | ≥100 | ≥120 | ≥150 | ≥150 | ≥200 | ≥230 | ||
| Elongation | MD | % | ≥15 | ≥3 | |||||||
| (%) | |||||||||||
| TD | ≥20 | ≥10 | |||||||||
| Breakdown voltage | No bending | ≥7 | ≥8 | ≥11 | ≥12 | ≥14 | ≥16 | ≥19 | ≥23 | ≥25 | |
| KV | |||||||||||
| After bending | ≥6 | ≥7 | ≥9 | ≥10 | ≥12 | ≥14 | ≥15 | ≥18 | ≥19 | ||
| Delamination | — | No Delamination, no bubble or other defects | |||||||||
| Heat affected(200±2℃) 10min | No Delamination, no bubble, no adhesive flow | ||||||||||
| Long-term heat resistance | ≥180 | ||||||||||
| (temperature index TI) | |||||||||||
| Weight and area conversion | m2/Kg | 7.23 | 6.33 | 5.18 | 4.39 | 3.8 | 3.36 | 2.85 | 2.28 | 1.97 | |
Advantages
AMA Aramid paper composite insulating materials has excellent heat-resistant, electrical, and mechanical properties. It is totally according with the standard of NMN (GB/T5591.3-2008), and it has the very similar property as NMN. It's perfect substitute of NMN.
Applications
AMA Aramid paper composite insulating materials is suitable for slot-to-slot insulation, phase-to-phase and turn-to-turn insulation of F-class motors, and can be used as interlayer insulation for transformers and other electrical appliance.
Storage & Notice
1. During slitting and use, edge gaps and cracks should be prevented to avoid tearing during operation and to avoid surface scratches, oil and dust pollution.
2. Store in an environment below 40℃, keep clean and dry, away from heat sources, and avoid direct sunlight.
3. The storage period is one year. If it exceeds the storage period, it can still be used if it passes the test according to the technical requirements.
Specifications
| Item | Unit | Requirement | |||||||||
| Nominal thickness | mm | 0.15 | 0.17 | 0.19 | 0.22 | 0.24 | 0.26 | 0.31 | 0.37 | 0.41 | |
| Thickness tolerance | mm | ±0.022 | ±0.024 | ±0.026 | ±0.031 | ±0.037 | ±0.041 | ||||
| Grammage | g/m2 | 150±18 | 170±20 | 200±24 | 230±27 | 270±32 | 305±36 | 360±43 | 450±54 | 515±61 | |
| Film nominal thickness | um | 36 | 50 | 75 | 100 | 125 | 150 | 188 | 250 | 300 | |
| Tensile strength | MD no bending | N/10mm | ≥150 | ≥150 | ≥170 | ≥190 | ≥220 | ≥240 | ≥270 | ≥330 | ≥370 |
| MD after bending | ≥90 | ≥90 | ≥105 | ≥120 | ≥150 | ≥180 | ≥200 | ≥300 | ≥330 | ||
| TD no bending | ≥80 | ≥90 | ≥100 | ≥110 | ≥130 | ≥170 | ≥200 | ≥250 | ≥300 | ||
| TD after bending | ≥70 | ≥70 | ≥90 | ≥100 | ≥120 | ≥150 | ≥150 | ≥200 | ≥230 | ||
| Elongation | MD | % | ≥15 | ≥3 | |||||||
| (%) | |||||||||||
| TD | ≥20 | ≥10 | |||||||||
| Breakdown voltage | No bending | ≥7 | ≥8 | ≥11 | ≥12 | ≥14 | ≥16 | ≥19 | ≥23 | ≥25 | |
| KV | |||||||||||
| After bending | ≥6 | ≥7 | ≥9 | ≥10 | ≥12 | ≥14 | ≥15 | ≥18 | ≥19 | ||
| Delamination | — | No Delamination, no bubble or other defects | |||||||||
| Heat affected(200±2℃) 10min | No Delamination, no bubble, no adhesive flow | ||||||||||
| Long-term heat resistance | ≥180 | ||||||||||
| (temperature index TI) | |||||||||||
| Weight and area conversion | m2/Kg | 7.23 | 6.33 | 5.18 | 4.39 | 3.8 | 3.36 | 2.85 | 2.28 | 1.97 | |
