



DMD Composite Insulation Paper
is a three-layer soft composite insulating material, which is composed of two sides of non-woven fabric and polyester film bonded by adhesive.
- Type
- YA6641 F class DMD Composite Insulation Paper
- Insulation Grade
- F
- Color
- white/blue/green/pink/printing
- Width
- 5mm-1.3M, normal 1m
- Thickness
- 0.0625mm-0.45mm
Description
DMD Composite Insulation Paper is a three-layer soft composite insulating material, which is composed of two sides of non-woven fabric and polyester film bonded by adhesive.
Technical Specifications
| Item | Unit | Requirement | |||||||
| Nominal thickness | mm | 0.15 | 0.18 | 0.2 | 0.23 | 0.25 | |||
| Thickness tolerance | mm | ±0.02 | ±0.025 | ±0.03 | ±0.03 | ±0.03 | |||
| Grammage | g/m2 | 140±20 | 190±28 | 200±30 | 220±33 | 260±39 | 270±40 | 300±45 | |
| Film nominal thickness | um | 50 | 75 | 75 | 100 | 125 | 125 | 150 | |
| Tensile strength | MD no bending | N/10mm | ≥80 | ≥120 | ≥130 | ≥150 | ≥180 | ≥190 | ≥180 |
| MD after bending | ≥80 | ≥105 | ≥110 | ≥130 | ≥150 | ≥170 | ≥180 | ||
| TD no bending | ≥80 | ≥105 | ≥110 | ≥130 | ≥150 | ≥170 | ≥190 | ||
| TD after bending | ≥70 | ≥90 | ≥100 | ≥110 | ≥120 | ≥150 | ≥170 | ||
| Elongation | MD no bending | % | ≥15 | ||||||
| MD after bending | ≥10 | ||||||||
| TD no bending | ≥20 | ||||||||
| TD after bending | ≥10 | ||||||||
| Breakdown voltage | No bending | KV | ≥6 | ≥7 | ≥8 | ≥9 | ≥10 | ≥12 | ≥13 |
| Delamination | — | No Delamination, no bubble or other defects | |||||||
| Heat affected(155±2℃) 10min | No Delamination, no bubble, no adhesive flow | ||||||||
| Long-term heat resistance | ≥155 | ||||||||
| (temperature index TI) | |||||||||
| Weight and area conversion | m2/Kg | 6.34 | 5.21 | 4.83 | 4.41 | 3.82 | 3.61 | 3.37 | |
Advantages
DMD Composite Insulation Paper has good stiffness, excellent dielectric properties, heat resistance, mechanical strength and impregnation
Applications
DMD Composite Insulation Paper is suitable for slot insulation, gasket insulation and turn-to-turn insulation of motors and appliances.
Storage & Notice
1. During slitting and use, edge gaps and cracks should be prevented to avoid tearing during operation and to avoid surface scratches, oil and dust pollution.
2. Store in an environment below 40℃, keep clean and dry, away from heat sources, and avoid direct sunlight.
3. The storage period is one year. If it exceeds the storage period, it can still be used if it passes the test according to the technical requirements.
Specifications
| Item | Unit | Requirement | |||||||
| Nominal thickness | mm | 0.15 | 0.18 | 0.2 | 0.23 | 0.25 | |||
| Thickness tolerance | mm | ±0.02 | ±0.025 | ±0.03 | ±0.03 | ±0.03 | |||
| Grammage | g/m2 | 140±20 | 190±28 | 200±30 | 220±33 | 260±39 | 270±40 | 300±45 | |
| Film nominal thickness | um | 50 | 75 | 75 | 100 | 125 | 125 | 150 | |
| Tensile strength | MD no bending | N/10mm | ≥80 | ≥120 | ≥130 | ≥150 | ≥180 | ≥190 | ≥180 |
| MD after bending | ≥80 | ≥105 | ≥110 | ≥130 | ≥150 | ≥170 | ≥180 | ||
| TD no bending | ≥80 | ≥105 | ≥110 | ≥130 | ≥150 | ≥170 | ≥190 | ||
| TD after bending | ≥70 | ≥90 | ≥100 | ≥110 | ≥120 | ≥150 | ≥170 | ||
| Elongation | MD no bending | % | ≥15 | ||||||
| MD after bending | ≥10 | ||||||||
| TD no bending | ≥20 | ||||||||
| TD after bending | ≥10 | ||||||||
| Breakdown voltage | No bending | KV | ≥6 | ≥7 | ≥8 | ≥9 | ≥10 | ≥12 | ≥13 |
| Delamination | — | No Delamination, no bubble or other defects | |||||||
| Heat affected(155±2℃) 10min | No Delamination, no bubble, no adhesive flow | ||||||||
| Long-term heat resistance | ≥155 | ||||||||
| (temperature index TI) | |||||||||
| Weight and area conversion | m2/Kg | 6.34 | 5.21 | 4.83 | 4.41 | 3.82 | 3.61 | 3.37 | |
