



F-DMD Electrical Prepreg Insulation Paper Material
DMD Prepreg Insulating material is a soft material formed by F class DMD impregnated epoxy resin and then baked and semi-cured.
- Type
- Class F DMD Prepreg Insulating material
- Insulation Grade
- F
- Color
- red
- Normal width
- 980mm
- Conventional thickness
- 0.15-0.20mm
Description
DMD Prepreg Insulating material is a soft material formed by F class DMD impregnated epoxy resin and then baked and semi-cured.
Technical Specifications
| Item | Unit | Requirement | ||||||
| Nominal thickness | mm | 0.18 | 0.2 | 0.23 | 0.25 | 0.3 | 0.4 | |
| Thickness tolerance | mm | ±0.02 | ±0.03 | ±0.04 | ||||
| Grammage | g/m2 | 200±20 | 240±28 | 250±37 | 290±45 | 380±53 | 460±54 | |
| Tensile strength | MD no bending | N/10mm | ≥80 | ≥120 | ||||
| Breakdown voltage | KV | ≥8 | ≥10 | |||||
| Soluble resin content | g/m2 | ≥45 | ||||||
| Volatile content | % | ≤1.5 | ||||||
| Tensile shear strength | Mpa | ≥5 | ||||||
| Temperature index(TI) | — | ≥155 | ||||||
Advantages
DMD Prepreg Insulating material has strong heat resistance, good dielectric properties and mechanical properties, can be cured at medium temperature, basically no low molecular volatiles are produced during the baking process, and the shrinkage rate is small;
Applications
DMD Prepreg Insulating material Suitable for dry-type transformer copper (aluminum) platinum as winding low-voltage interlayer insulation, as well as the slot insulation and inter-turn insulation of B, F-class motors and electrical appliances.
Storage & Notice
1. During slitting and use, edge gaps and cracks should be prevented to avoid tearing during operation and to avoid surface scratches, oil and dust pollution.
2. Store in an environment below 40℃, keep clean and dry, away from heat sources, and avoid direct sunlight.
3. The storage period is one year. If it exceeds the storage period, it can still be used if it passes the test according to the technical requirements.
Specifications
| Item | Unit | Requirement | ||||||
| Nominal thickness | mm | 0.18 | 0.2 | 0.23 | 0.25 | 0.3 | 0.4 | |
| Thickness tolerance | mm | ±0.02 | ±0.03 | ±0.04 | ||||
| Grammage | g/m2 | 200±20 | 240±28 | 250±37 | 290±45 | 380±53 | 460±54 | |
| Tensile strength | MD no bending | N/10mm | ≥80 | ≥120 | ||||
| Breakdown voltage | KV | ≥8 | ≥10 | |||||
| Soluble resin content | g/m2 | ≥45 | ||||||
| Volatile content | % | ≤1.5 | ||||||
| Tensile shear strength | Mpa | ≥5 | ||||||
| Temperature index(TI) | — | ≥155 | ||||||
