



Flexible Electrical Insulation Material DMD CLASS F Insulating Paper
Brief introduction of the DMD insulation paper DMD flexible laminates is a three-layer flexible composite material.
- Composition
- Brief introduction of the DMD insulation paper
Description
DMD flexible laminates is a three-layer flexible composite material. It is made by bonding both sides of non-woven polyester fabric with polyester films with F-grade or B-grade adhesive. About the Yaan Polyester Film: It is made from Polyethylene terephthalate by casting & Biaxially oriented. It is widely used for the end wrap insulation, liner insulation of electrical oils, electromagnetic wire wrap insulation, cable wrapping on motor, transformer or other electrical appliances.
Technical Specifications
| Item | Unit | Requirement | |||||||||
| Nominal thickness | mm | 0.15 | 0.18 | 0.2 | 0.23 | 0.25 | 0.3 | 0.35 | 0.4 | 0.45 | |
| Thickness tolerance | mm | ±0.02 | ±0.025 | ±0.03 | ±0.03 | ±0.03 | ±0.03 | ±0.035 | ±0.04 | ±0.045 | |
| Grammage | g/m2 | 140±20 | 190±28 | 220±33 | 260±39 | 300±45 | 350±52 | 425±63 | 500±75 | 560±84 | |
| Film nominal thickness | um | 50 | 75 | 100 | 125 | 150 | 190 | 250 | 300 | 350 | |
| Tensile strength | MD no bending | N/10mm | ≥80 | ≥120 | ≥140 | ≥180 | ≥200 | ≥270 | ≥320 | ≥340 | ≥370 |
| MD after bending | ≥80 | ≥105 | ≥120 | ≥150 | ≥170 | ≥200 | ≥300 | ≥320 | ≥350 | ||
| TD no bending | ≥80 | ≥105 | ≥120 | ≥150 | ≥170 | ≥200 | ≥300 | ≥320 | ≥350 | ||
| TD after bending | ≥70 | ≥90 | ≥100 | ≥120 | ≥130 | ≥150 | ≥200 | ≥220 | ≥250 | ||
| Elongation | MD no bending | % | ≥15 | ≥5 | ≥5 | ||||||
| MD after bending | ≥10 | ≥5 | ≥3 | ||||||||
| TD no bending | ≥20 | ≥5 | ≥5 | ||||||||
| TD after bending | ≥10 | ≥5 | ≥2 | ||||||||
| Breakdown voltage | No bending | KV | ≥6 | ≥7 | ≥9 | ≥10 | ≥12 | ≥15 | ≥18 | ≥20 | ≥22 |
| Delamination | — | No Delamination, no bubble or other defects | |||||||||
| Heat affected(155±2℃) 10min | No Delamination, no bubble, no adhesive flow | ||||||||||
| Long-term heat resistance | ≥130 | ||||||||||
| (temperature index TI) | |||||||||||
| Weight and area conversion | m2/Kg | 6.37 | 5.21 | 4.41 | 3.82 | 3.37 | 2.86 | 2.29 | 1.97 | 1.73 | |
Specifications
| Item | Unit | Requirement | |||||||||
| Nominal thickness | mm | 0.15 | 0.18 | 0.2 | 0.23 | 0.25 | 0.3 | 0.35 | 0.4 | 0.45 | |
| Thickness tolerance | mm | ±0.02 | ±0.025 | ±0.03 | ±0.03 | ±0.03 | ±0.03 | ±0.035 | ±0.04 | ±0.045 | |
| Grammage | g/m2 | 140±20 | 190±28 | 220±33 | 260±39 | 300±45 | 350±52 | 425±63 | 500±75 | 560±84 | |
| Film nominal thickness | um | 50 | 75 | 100 | 125 | 150 | 190 | 250 | 300 | 350 | |
| Tensile strength | MD no bending | N/10mm | ≥80 | ≥120 | ≥140 | ≥180 | ≥200 | ≥270 | ≥320 | ≥340 | ≥370 |
| MD after bending | ≥80 | ≥105 | ≥120 | ≥150 | ≥170 | ≥200 | ≥300 | ≥320 | ≥350 | ||
| TD no bending | ≥80 | ≥105 | ≥120 | ≥150 | ≥170 | ≥200 | ≥300 | ≥320 | ≥350 | ||
| TD after bending | ≥70 | ≥90 | ≥100 | ≥120 | ≥130 | ≥150 | ≥200 | ≥220 | ≥250 | ||
| Elongation | MD no bending | % | ≥15 | ≥5 | ≥5 | ||||||
| MD after bending | ≥10 | ≥5 | ≥3 | ||||||||
| TD no bending | ≥20 | ≥5 | ≥5 | ||||||||
| TD after bending | ≥10 | ≥5 | ≥2 | ||||||||
| Breakdown voltage | No bending | KV | ≥6 | ≥7 | ≥9 | ≥10 | ≥12 | ≥15 | ≥18 | ≥20 | ≥22 |
| Delamination | — | No Delamination, no bubble or other defects | |||||||||
| Heat affected(155±2℃) 10min | No Delamination, no bubble, no adhesive flow | ||||||||||
| Long-term heat resistance | ≥130 | ||||||||||
| (temperature index TI) | |||||||||||
| Weight and area conversion | m2/Kg | 6.37 | 5.21 | 4.41 | 3.82 | 3.37 | 2.86 | 2.29 | 1.97 | 1.73 | |
