



Insulation Paper Pressboard
Insulation pressboard is made from 100% superior sulfate insulating wood pulp.
- Type
- Electrical Insulation Pressboard
- Color
- Natural
Description
0.3 Conventional size 1150*800mm0.5 Conventional size 1150*800mm and 1M * 2M0.8 above with mesh, conventional size 1m*2mInsulation pressboard is made from 100% superior sulfate insulating wood pulp. High chemical purity, excellent enlonation, good Mechanical and dielectric Strength.
Technical Specifications
| Item name | unit | Specification | ||||||
| B type | ||||||||
| B.0.1 | B.2.1 | |||||||
| D | G | D | G | B.3.1 | ||||
| Thickness tolerance | ≤1.6mm | % | ±7.5 | ±7.5 | ±7.5 | |||
| >1.6mm | ±5.0 | ±5.0 | ±5.0 | |||||
| Tightness | ≤1.6mm | g/cm3 | 1.0~1.2 | 1.2~1.3 | 1.0~1.2 | 1.2~1.3 | 1.00~1.20 | |
| >1.6-3.0mm | 1.10~1.25 | |||||||
| >3.0-6.0mm | 1.15~1.30 | |||||||
| >6.0-8.0mm | 1.20~1.30 | |||||||
| Tensile strength | MD | ≤1.6mm | N/mm2 | 80 | 110 | 80 | 110 | 100 |
| >6.0-8.0mm | 80 | 120 | 80 | 110 | 105 | |||
| >3.0-6.0mm | 80 | 130 | 80 | 110 | 110 | |||
| >6.0-8.0mm | — | — | — | — | 110 | |||
| TD | ≤1.6mm | 55 | 85 | 55 | 80 | 75 | ||
| >6.0-8.0mm | 55 | 90 | 55 | 85 | 80 | |||
| >3.0-6.0mm | 55 | 80 | 50 | 80 | 85 | |||
| >6.0-8.0mm | ≥ | — | — | — | — | 85 | ||
| Elongation rate | MD | % | 6 | 7 | 6 | 7 | 3 | |
| TD | ≥ | 7 | 9 | 8 | 9 | 4 | ||
| Shrinkage rate | MD | % | 0.7 | 0.7 | 0.5 | |||
| TD | 1 | 1 | 0.7 | |||||
| Thick direction | ≤ | 5 | 5 | 5 | ||||
| Oil absorption rate | ≤1.6mm | % | 15 | 15 | 10 | 11 | ||
| >1.6-3.0mm | 9 | |||||||
| >3.0-8.0mm | ≥ | 7 | ||||||
Advantages
Insulation pressboard has good mechanical strength, high electrical resistance, large tightness, small shrinkage, good flatness.
Applications
Insulation pressboard is used for oil-immersed transformers, capacitors, reactors and switches.
Storage & Notice
1. During slitting and use, edge gaps and cracks should be prevented to avoid tearing during operation and to avoid surface scratches, oil and dust pollution.
2. Store in an environment below 40℃, keep clean and dry, away from heat sources, and avoid direct sunlight.
3. The storage period is one year. If it exceeds the storage period, it can still be used if it passes the test according to the technical requirements.
Specifications
| Item name | unit | Specification | ||||||
| B type | ||||||||
| B.0.1 | B.2.1 | |||||||
| D | G | D | G | B.3.1 | ||||
| Thickness tolerance | ≤1.6mm | % | ±7.5 | ±7.5 | ±7.5 | |||
| >1.6mm | ±5.0 | ±5.0 | ±5.0 | |||||
| Tightness | ≤1.6mm | g/cm3 | 1.0~1.2 | 1.2~1.3 | 1.0~1.2 | 1.2~1.3 | 1.00~1.20 | |
| >1.6-3.0mm | 1.10~1.25 | |||||||
| >3.0-6.0mm | 1.15~1.30 | |||||||
| >6.0-8.0mm | 1.20~1.30 | |||||||
| Tensile strength | MD | ≤1.6mm | N/mm2 | 80 | 110 | 80 | 110 | 100 |
| >6.0-8.0mm | 80 | 120 | 80 | 110 | 105 | |||
| >3.0-6.0mm | 80 | 130 | 80 | 110 | 110 | |||
| >6.0-8.0mm | — | — | — | — | 110 | |||
| TD | ≤1.6mm | 55 | 85 | 55 | 80 | 75 | ||
| >6.0-8.0mm | 55 | 90 | 55 | 85 | 80 | |||
| >3.0-6.0mm | 55 | 80 | 50 | 80 | 85 | |||
| >6.0-8.0mm | ≥ | — | — | — | — | 85 | ||
| Elongation rate | MD | % | 6 | 7 | 6 | 7 | 3 | |
| TD | ≥ | 7 | 9 | 8 | 9 | 4 | ||
| Shrinkage rate | MD | % | 0.7 | 0.7 | 0.5 | |||
| TD | 1 | 1 | 0.7 | |||||
| Thick direction | ≤ | 5 | 5 | 5 | ||||
| Oil absorption rate | ≤1.6mm | % | 15 | 15 | 10 | 11 | ||
| >1.6-3.0mm | 9 | |||||||
| >3.0-8.0mm | ≥ | 7 | ||||||
