Technical Guides

Oil-immersed transformer insulation materials

Published on May 07, 2024  |  By YAAN Engineering Dept.

Today we will learn about the insulation materials of oil-immersed transformers. About ten materials, as follows:

1. Use diamond dot paper (DDP) to reduce the displacement between transformer winding layers and reduce the temperature rise of the transformer oil. This product is suitable for interlayer insulation of windings in amorphous alloy transformers, mutual inductors, etc.

2. Polyester one-way binding tape can be used for binding the transformer core.

3. Oil channel strips are made of rectangular electrical strips and DDP bonded with special adhesive. This product can be firmly bonded to the winding coil, replacing the traditional corrugated container plate that is easy to deform and cause displacement, so that the coil has better mechanical and electrical properties, so it is widely used in oil-immersed transformers.

4. Electrical crepe paper has good oil solubility and is widely used for insulation of overlapping parts and insulation wrapping of lead parts of oil-immersed transformers, transformers, reactors, etc., improving the electrical and mechanical properties of the product's insulation structure. 

5. Electrical crepe paper tubes are mainly used as insulation coating materials for oil-immersed transformer leads.

6. Phenolic laminated paper tube has good dielectric properties and is suitable for transformer oil as an insulating structural component of electrical equipment in dry environments. Temperature resistance: E grade 120 degrees Celsius.

7. Electrical cardboard is made of 100% pure sulfate wood pulp, with high chemical purity, good elongation, good mechanical strength and electrical strength. It is widely used in oil-immersed power transformers, reactors, capacitors, switches, etc., and is suitable for making support bars, paper tubes, gaskets, end rings, etc.

8. Electrical laminated wood is mainly used as insulation and support material in transformers and transformers. It is suitable for making coil pressure plates, core pads, trapezoidal pads, lead brackets, clamps, etc. It has moderate specific gravity, high mechanical strength, good solubility in transformer oil, and excellent processing performance. In addition, its dielectric constant is similar to that of transformer oil, so it can be used in 105℃ transformer oil.

This product is widely used to manufacture upper and lower pressure plates, lead brackets, yoke pads and other transformer structural parts; it is also used to make clamps in transformers, replacing steel plates, insulating cardboard and epoxy boards, thereby reducing the weight and material cost of the transformer.

9. Electrical white cloth tape is made of cotton yarn and is widely used for general binding of electrical coils.

10. Electrical polyester high and low shrinkage tape has certain heat resistance and insulation properties, and is widely used as coil binding material for motors, electrical appliances, and transformers.

Insulation Polyester Shrinking Tape

INQUIRY CHANNEL

Have an upcoming project? Let's talk.

Send us your required specifications (thickness, width, quantity) and we will send a customized quotation within 12 hours.

✉
☏

WhatsApp / Phone

+86 19937408623