Properties of paper fiber materials. The insulating paper fiber material is the most important insulating component material in oil immersed transformers. Paper fiber is the basic solid tissue component of plants. There are positively charged atomic nuclei and negatively charged electrons running around the atomic nuclei in the atoms that make up the material molecules. Unlike metal conductors, there are almost no free electrons in the insulating materials. The very small conductive current in the insulator mainly comes from ionic conductivity. Cellulose is composed of carbon, hydrogen and oxygen. Therefore, due to the existence of hydroxyl radical in the molecular structure of cellulose, there is a potential for water formation, which makes the paper fiber water bearing. In addition, these hydroxyl radicals can be considered as the center surrounded by various polar molecules (such as acid and water). They are combined by hydrogen bonds, making the fiber vulnerable to damage. At the same time, the fiber often contains a certain proportion (about 7%) of impurities, including a certain amount of water. Because the fiber is colloidal, these water cannot be completely removed. This also affects the performance of paper fibers.
Polar fibers are not only easy to absorb moisture (moisture makes strong polar media), but also weaken the interaction between hydroxyl radicals when paper fibers absorb water. Under the condition of unstable fiber structure, the mechanical strength deteriorates rapidly. Therefore, paper insulation parts can only be used after drying or vacuum drying treatment and immersion in oil or insulating paint. The purpose of immersion is to keep fibers wet Ensure that it has high insulation and chemical stability and high mechanical strength. At the same time, after the paper is sealed by paint, it can reduce the absorption of water by the paper, prevent the oxidation of the material, and fill the gap to reduce the bubbles that may affect the insulation performance, cause partial discharge and electric breakdown. However, some people think that some paints will slowly dissolve into the oil after being dipped into the oil, which will affect the performance of the oil. Therefore, attention should be paid to the application of such paints.
