News & Technical

Transformer Oil Compatibility: Choosing Insulation Paper for Oil-Immersed Units

Published on 2026-07-31

Oil-immersed transformers rely on the synergistic insulation system of paper and mineral oil. The paper-oil composite must maintain dielectric integrity over 20-40 years of service. Selecting the right insulation paper is therefore critical.

Key Selection Criteria

Key Selection Criteria

1. Oil Absorbency: Crepe paper and kraft paper are preferred due to their fibrous structure, which absorbs oil readily, eliminating air voids that could cause partial discharge.

2. Chemical Stability in Oil: The paper must not degrade or release acids into the oil. High-purity sulfate kraft pulp (≥90% alpha-cellulose) meets this requirement.

3. Thermal Aging in Oil: Paper in transformer oil ages differently than in air. At 98°C oil temperature, standard kraft paper has a thermal class of A (105°C). Thermally upgraded paper (with nitrogen stabilization) achieves Class E (120°C), doubling insulation life.

4. Moisture Content: Paper moisture must be controlled below 0.5% during installation. Moisture in paper accelerates thermal aging by 2x for every 1% increase.

Recommended Materials

• Distribution transformers: Standard kraft paper (Class A)
• Power transformers: Thermally upgraded kraft paper (Class E)
• High-voltage bushings: Crepe paper for conformability
• Barrier boards: Pressboard (pre-compressed, oil-impregnated)

Related Articles

You may also like

INQUIRY CHANNEL

Have an upcoming project? Let's talk.

Send us your required specifications (thickness, width, quantity) and we will send a customized quotation within 12 hours.

✉
☏

WhatsApp / Phone

+86 19937408623